Site Search

What is the difference between an airless sprayer and an HVLP sprayer?

A) Airless Sprayers atomize coatings by forcing the product through a small tip opening at very high fluid pressure. The fluid pressures range from 1200-3600 PSI. Airless sprayers are capable of spraying larger surfaces at higher speeds. Airless...

What is the difference between the FLEXiO 570/590 and the FLEXiO 2000/3000?

The main difference between the FLEXiO 570/ 590 and FLEXiO 2000/3000 is the design of the iSpray front end. The new nozzle designed iSpray front end will provide paint control with a uniform and contained pattern. Also, the new paint flow...

What is the difference between the FLEXiO 2000/3000 and the FLEXiO 4000/5000?

A) The FLEXiO 2000 and 3000 are handheld sprayers in which the turbine is held in your hand. The FLEXiO 2000 comes with the new nozzle designed iSpray and is a two speed (hi and lo) sprayer. The FLEXiO 3000 comes with the new nozzle...

Why does air continuously come out when I turn my sprayer on?

The FLEXiO 690, 890,4000 and 5000 are bleeder guns. With a bleeder gun air flows continuously; the trigger only starts and stops the paint flow.

What is the iSpray nozzle used for?

The iSpray Nozzle, which will spray unthinned coatings including latex paint and stains, is ideal for big surface projects such as spraying walls, sheds, fences etc… It will provide a roller-like or slightly stippled finish.

What is the Detail finish nozzle used for?

The Detail finish nozzle is best used on your fine finish projects such as spraying cabinets, furniture, doors, trim etc. It will provide a smoother, finer finish than the iSpray Nozzle. Depending on your material, the...

What types of coatings can be sprayed through the FLEXiO series?

A) The Flexio Series will spray water-based or oil-based paints and stains. B) Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC), reference the paint can. Flash point is the temperature...

Do I have to thin the material?

This will depend on which front end is being used. The iSpray nozzle – This front end will not require thinning for most materials. The Detail finish nozzle – This front end may require thinning.

What should I use to clean my FLEXiO sprayer?

When cleaning, use the appropriate cleaning solution (warm, soapy water for latex materials; mineral spirits for oil-based materials). Always check the back of the paint container for appropriate cleaning solution. For more information on cleaning your...

Is the FLEXiO series recommended for indoor and outdoor use?

Yes, the FLEXiO series are indoor and outdoor sprayers.

Can I spray the ceiling with the FLEXiO series?

A) Yes, you can. As long as the sprayer is not tipped more than a 45 degree angle using the FLEXiO handheld Material could get into the turbine and performance can be decreased. B) For ceilings, the...

Can the FLEXiO series be used with 220volt?

The FLEXiO series designed for the U.S is for use on a 120 Volt circuit. If you need a sprayer for 220volt, you can find a dealer or see our 220volt Wagner version.

Where can I get parts for my FLEXiO series?

Parts can be purchase through online distributors, Wagner online or by calling us direct at 1-800-328-8251.

What is the warranty on the FLEXiO series?

This product, manufactured by Wagner, is warranted to the original retail purchaser against defects in material and workmanship for one year from date of purchase. This warranty does not cover damage resulting from improper use, accidents,...

What is the Difference Between the FLEXiO 2000 or 2500 and the FLEXiO 3000 or 3500?

The FLEXiO 2500 and 3500 are the new, upgraded units to the original FLEXiO 2000 and 3000. The new units are very similar and offer the same capabilities as the original models. The main difference is...

What does HEA mean?

HEA stands for High Efficiency Airless which means that the pump will have 55% less overspray than standard airless sprayers.

Can HEA sprayers be used indoors and outdoors?

Yes the HEA sprayers can be used indoors and outdoors. Learn More.

What spray tips are compatible with the HEA sprayers?

Only Wagner and Titan HEA spray tips are compatible with the HEA sprayers.

How do I know what size spray tip to use?

The tip size is determined by the coating manufacturer. It may be found in the application section listed on the label of the can or bucket of paint. If it is not listed on the can...

Can you use extensions with the HEA sprayers?

Yes, you can use Wagner and Titan extension up to 24”.

How long of a spray hose can I use on the HEA sprayers?

The maximum hose length for each sprayer is double the length that it came with.

Is there a swivel available for the HEA sprayers?

There is a filter/swivel assembly available for purchase, contact customer service at 1-800-328-8251.

Is there a roller attachment available for the HEA sprayers?

There is no roller attachment available for the HEA sprayers.

Where can I get parts or accessories for the HEA sprayers?

Accessories may be available from your local retailer or online. Parts and accessories can be purchased directly from us over the phone at 1-800-328-8251.

What is light household oil?

It’s multipurpose oil that can be used to lubricate the sprayer. Examples are: 3-in-one oil, 10W30 motor oil, vegetable oil, sewing machine oil, or air tool oil.

What types of coatings can be sprayed through the HEA sprayers?

A) The HEA Sprayers will spray water or oil-based paints and stains. B) Do not spray or clean with liquids having a flash point of less than 38ºC (100ºF). Flash point is the temperature at which a fluid...

Do I need to thin the material?

Refer to coating manufacturer’s recommendations for thinning the product to be sprayed.

Can I use a generator with the HEA sprayers?

Yes, you can use a 5,000 Watt but you must disable the idle-down feature.

Can I use the HEA sprayer to paint my car?

This isn’t an automotive quality finish sprayer so it will not produce a showroom finish such as what you would generally want on a car.

Can the HEA sprayer be used with 220volt?

The HEA sprayers are equipped with a 15 amp minimum circuit and designed to be used with 115volt, 60HZ current. If you need a sprayer internationally you can find a dealer or see our 220volt Wagner...

Can the HEA sprayers be used with a 5 gallon bucket?

Yes, all Control Pro and ControlMax sprayers can be used with a one or five gallon container.

What is the warranty on the HEA sprayers?

This product, manufactured by Wagner, is warranted to the original retail purchaser against defects in material and workmanship for two years from date of purchase. This warranty does not cover damage resulting from improper use, accidents,...

What is a difference between Control Series and FLEXiO Series?

A) The Control Series Sprayers are for staining and finishing small to medium sized projects and are capable of spraying low viscosity coatings. B) The FLEXiO Series Sprayers are a flexible solution for any type of...

Can I spray paint with the Control Series?

A) The Control Spray Max and the Control Stainer 350 will spray some latex paints. B) Primer and latex paint & primer in one are not recommended to be used in the Control Series.

Can I spray oil base products?

The Control series will spray both water-based and oil-based products.

What should I use to clean my Control Series sprayer?

Where can I get parts for my Control Series?

Parts can be purchased through online distributors, Wagner Online or by calling us directly at 1-800-328-8251.

What is the warranty on the Control Series?

Can the Power Painter/Stainer be used indoors?

The Power Painters/Stainer is not recommended for spraying indoors.

Do I need to thin the material?

This varies depending on the type of paint and the project in which you are trying to complete. The addition of water or mineral spirits to the paint may be necessary in order to thin the...

What is the PSI (Pound per square inch) and tip size for the EZ-Tilt Power Painters?

The pressure is about 2,000-2,500PSI. The sprayer has dual orifice technology.

Can I use Power Painters/Stainer with 5 gallon bucket?

The EZ-Tilt Power Painters/Stainer will work with the 5 gallon bucket of paint with the remote suction set assembly which may need to be purchased separately.

How should I clean my Power Painters/Stainer?

Use the appropriate cleaning solution (warm, soapy water for latex materials; mineral spirits for oil-based materials). Always check the back of the paint container for appropriate cleaning solution.

Can the Power Painters/Stainer be used with 220volt?

These sprayers cannot be used with 220volt, it is rated for 110volt only. If you need a 220volt sprayer you can find a dealer or see our 220volt Wagner version.

Where can I get parts for my Power Painter/Stainer?

Parts can be purchase through online distributors, Wagner Online or by calling us direct at 1-800-328-8251.

What is the warranty on the Power Painters/Stainers?

What is the difference between the Smart Roller, the Smart Flow Roller, and the Paint-N-Roll?

A) The SMART Roller has a ratchet power trigger that directly feeds paint to the roller cover, eliminating the need for messy paint trays for refills. The SMART Flow Roller has the convenience of being operated...

What type of projects can I use the Smart Roller, the Smart Flow Roller, and the Paint-N-Roll for?

The roller is perfect for medium-sized projects, and the extended handle lets you reach 8′ ceilings with ease.

How much area can I cover with the Smart Roller, the Smart Flow Roller, and the Paint-N-Roll?

The Smart Roller, the Smart Flow Roller, and the Paint-N-Roll reservoir holds up to 22fl. oz. of paint which will cover up to 70 sq. ft. in a single fill.

Can I draw out of 1 or 5 gallon paint container?

A) Smart Roller, the Smart Flow Roller, and the Paint-N-Roll can draw paint directly out of one gallon container. An additional accessory adapter will be needed for the five gallon container. B) The SMART Sidekick Roller...

Will any standard roller cover fit?

No, it will not. It has to be a Wagner Roller Cover.

What type of coatings can be used?

A) It can be used with water-based and oil-based material. B) Do not roll or clean with liquids having a flash point of less than 100ºF (38ºC), reference the paint can for the flashpoint.

What do I use to clean my roller?

Does the Smart Edge roller work with the Smart Sidekick?

The Smart Edge roller itself does not but you can buy the 3″ roller arm assembly and an adapter that will fit on the Sidekick allowing you to do trim.

Will the SMART SideKick work with extension poles?

Yes, it will accept most standard threaded extension poles.

If I use an extension with the Smart Sidekick how can I control the on/off switch on the handle?

When you are using an extension, you will need to press and release the handle button until paint appears through the roller cover. Start painting as normal, bringing the roller handle down, pressing and releasing the...

Is there an internal hose available for the Smart Sidekick?

No, there are no internal parts available.

Will the SMART SideKick work in a 220 volt outlet?

No, the SideKick is designed to work with standard North American 110 volt outlets.

Can I use paint in the Renuvo?

No, you can use water and oil-based stains only.

What should I use to clean my Renuvo?

What is the warranty on the Roller?

Warranty information can be found here.

How do you remove the power cord from the Furno heat gun?

Once the cord is attached to the Furno heat gun it is designed to stay attached.

What is a difference between Furno 700 and Furno 750?

The FURNO 700 and FURNO 750 heat guns have all the same function and features. However, the Furno 750 comes with four nozzles, a 5 in 1 tool, and a sturdy carrying case that keeps everything...

Is there any internal replacement parts for the Furno Series?

No, there is not any internal replacement parts for the Furno Series.

Where can I get parts and accessories?

Parts can be purchase through online distributors, Wagner Online or by calling us direct at 1-800-328-8251.

Can I get a case for my Furno heat gun?

Yes you can. You can give us a call at 1-800-328-8251

Will the Furno heat guns work in a 220 volt outlet?

No, the Furno heat guns are designed to work with standard North American 110 volt outlets.

What is the warranty on the Furno Series?

It will depend on which Furno Series you purchased. The warranty information is: • Furno 300-Two year limited warranty • Furno 500-Three year limited warranty • Furno 700/750-Five year limited warranty The product is designed for...

What is a difference between the 715 Steamer and the 915 Steamer?

A) The 715 Power Steamer is ideal for the quick and effective removal of all types of wallpaper. The steamer comes with a large 8″ x 11″ steam plate for large work areas and a small...

Do the parts on the 715 and the 705 steamers interchange?

The parts do not interchange.

Do the parts on the 715 steamer interchange with the 915 steamer?

No, the parts do not interchange.

How many PSI or bars does the 915 Steamer have?

The pressure relief valve opens at 3.25 +/-0.2 bar (47 +/-3 PSI).

How long does it take for the Steamer to heat up?

A) The 715 Steamer will take approximately 15 minutes for the water tank to produce steam. A full container will operate for about 70 minutes. B) When you turn the 915 Steamer switch to on (I)...

What temperatures does the steamer operate at?

The Steamer operates at approximately 212 degrees F or 100 degrees C.

Where can I get parts and accessories?

Parts can be purchase through online distributors, Wagner Online or by calling us direct at 1-800-328-8251.

What is the warranty on the Steamer?

Warranty information can be found at this https://www.wagnerspraytech.com/warranty/

What surfaces can the PaintEATER be operated on?

The PaintEATER can be used on solid wood, Masonite, siding, wood siding, concrete, and steel.

Will the PaintEATER work indoors?

We do not recommend using the Paint Eater indoors.

How long should the disc last?

This unit will only accommodate the Wagner PaintEATER disc, other discs will not work.

Will other manufacturers discs work on the PaintEATER?

This unit will only accommodate the Wagner PaintEATER disc, other discs will not work.

Can I strip lead-based paints with this unit?

No, we do not recommend stripping lead based paint with the PaintEATER.

Where can I get replacement discs?

Discs can be purchased at certain retailers, through online distributors, at Wagner online or by calling us directly at 1-800-328-8251.

Will the PaintEATER work in a 200 volt outlet?

No, the Paint Eater is designed to work with standard North American 110 volt outlets.

What is the warranty on the Paint EATER?

Warranty information can be found at this link.

What finishes can the PowerTex be used to create?

Orange peel, knockdown and popcorn acoustical ceiling.

How thick should the wall compound mix be?

We suggest the thickness of pancake batter.

Can I spray paint or primer with the PowerTex?

No, it will not spray paint or primer

Can I create a heavy stucco appearance with the PowerTex?

Yes you can with multiple heavy applications and the correct troweling technique.

Is it possible to spray ceilings with the PowerTex?

Yes, A simple twist of the hopper and you have the perfect angle to spray a ceiling.

Where can I get parts?

Parts can be purchased through online distributors, Wagner online at www.wagnerspraytech.com or by calling us directly at 1-800-328-8251.

Will the PowerTex work in a 220 volt outlet?

No, the PowerTex is designed to work with standard North American 110 volt outlets.

What is the warranty on the PowerTex?

Warranty information can be found at this link.

Site Search

Search

Filters

Type

Product Category

Product Series

Promotion

Difficulty

Project Type

Product

Video Type

Sort By

What is the difference between an airless sprayer and an HVLP sprayer?

What is the difference between the FLEXiO 570/590 and the FLEXiO 2000/3000?

What is the difference between the FLEXiO 2000/3000 and the FLEXiO 4000/5000?

Why does air continuously come out when I turn my sprayer on?

What is the iSpray nozzle used for?

What is the Detail finish nozzle used for?

What types of coatings can be sprayed through the FLEXiO series?

Do I have to thin the material?

What should I use to clean my FLEXiO sprayer?

Is the FLEXiO series recommended for indoor and outdoor use?

Can I spray the ceiling with the FLEXiO series?

Can the FLEXiO series be used with 220volt?

Where can I get parts for my FLEXiO series?

What is the warranty on the FLEXiO series?

What is the Difference Between the FLEXiO 2000 or 2500 and the FLEXiO 3000 or 3500?

What does HEA mean?

Can HEA sprayers be used indoors and outdoors?

What spray tips are compatible with the HEA sprayers?

How do I know what size spray tip to use?

Can you use extensions with the HEA sprayers?

How long of a spray hose can I use on the HEA sprayers?

Is there a swivel available for the HEA sprayers?

Is there a roller attachment available for the HEA sprayers?

Where can I get parts or accessories for the HEA sprayers?

What is light household oil?

What types of coatings can be sprayed through the HEA sprayers?

Do I need to thin the material?

Can I use a generator with the HEA sprayers?

Can I use the HEA sprayer to paint my car?

Can the HEA sprayer be used with 220volt?

Can the HEA sprayers be used with a 5 gallon bucket?

What is the warranty on the HEA sprayers?

What is a difference between Control Series and FLEXiO Series?

Can I spray paint with the Control Series?

Can I spray oil base products?

What should I use to clean my Control Series sprayer?

Where can I get parts for my Control Series?

What is the warranty on the Control Series?

Can the Power Painter/Stainer be used indoors?

Do I need to thin the material?

What is the PSI (Pound per square inch) and tip size for the EZ-Tilt Power Painters?

Can I use Power Painters/Stainer with 5 gallon bucket?

How should I clean my Power Painters/Stainer?

Can the Power Painters/Stainer be used with 220volt?

Where can I get parts for my Power Painter/Stainer?

What is the warranty on the Power Painters/Stainers?

What is the difference between the Smart Roller, the Smart Flow Roller, and the Paint-N-Roll?

What type of projects can I use the Smart Roller, the Smart Flow Roller, and the Paint-N-Roll for?

How much area can I cover with the Smart Roller, the Smart Flow Roller, and the Paint-N-Roll?

Can I draw out of 1 or 5 gallon paint container?

Will any standard roller cover fit?

What type of coatings can be used?

What do I use to clean my roller?

Does the Smart Edge roller work with the Smart Sidekick?

Will the SMART SideKick work with extension poles?

If I use an extension with the Smart Sidekick how can I control the on/off switch on the handle?

Is there an internal hose available for the Smart Sidekick?

Will the SMART SideKick work in a 220 volt outlet?

Can I use paint in the Renuvo?

What should I use to clean my Renuvo?

What is the warranty on the Roller?

How do you remove the power cord from the Furno heat gun?

What is a difference between Furno 700 and Furno 750?

Is there any internal replacement parts for the Furno Series?

Where can I get parts and accessories?

Can I get a case for my Furno heat gun?

Will the Furno heat guns work in a 220 volt outlet?

What is the warranty on the Furno Series?